THESE NOTES ARE PREPARED BY
AST Part 66 Modules to Teaching Notes References Issue No 2.
AST / AIR SERVICE TRAINING AND ENGINEERING.
So either you apply with self training and you make your exams with AST, or you follow a complete study course with AST in UK OR OTHER LOCAL ORGANISATION WITH PART-147 APPROVAL , your certificate will be issued by AST UK under JAR 147 regulations,
This is valid for a complete JAR 66 B1.1/B2 license or to remove your limitation from a valid JAR 66 license.
Cat A Only
Module 01 MATHEMATICS
1.1
Arithmetic Arithmetical terms and signs, methods of multiplication and
Division, fractions and decimals, factors and multiples, weights, measures
And conversion factors, ratio and proportion, averages and percentages,
Areas and volumes, square, cubes, square and cube roots.
A/001
Basic Engineering Mathematics, Fourth Edition,
by John Bird
1.2 (a) Algebra Evaluating simple algebra expressions, addition, subtraction,
Multiplication and division, use of brackets, simple algebraic fractions
A/001
Basic Engineering Mathematics, Fourth Edition,
by John Bird
1.2 (b) Algebra *** Not Applicable ***
1.3 (a) Geometry *** Not Applicable ***
1.3 (b) Geometry Graphical representation, nature and uses of graphs, graphs
Of equations / functions
A/001
Basic Engineering Mathematics, Fourth Edition,
by John Bird
1.3 (c) Geometry *** Not Applicable ***
Cat B 1 & 2 Module 01 MATHEMATICS
1.1
Arithmetic Arithmetical terms and signs, methods of multiplication and
division, fractions and decimals, factors and multiples, weights, measures
and conversion factors, ratio and proportion, averages and percentages,
areas and volumes, squares, cubes, square and cube roots.
A/001
Basic Engineering Mathematics, Fourth Edition,
by John Bird
1.2 (a) Algebra Evaluating simple algebra expressions, addition, subtraction,
Multiplication and division, use of brackets, simple algebraic fractions
A/001
Basic Engineering Mathematics, Fourth Edition,
by John Bird
1.2 (b)
Algebra Linear equations and their solutions.
Indices and powers, negative and fractional indices.
Binary and other applicable numbering systems.
Simultaneous equations and second degree equations with one unknown
Logarithms
A/001
Basic Engineering Mathematics, Fourth Edition,
by John Bird
1.3 (a) Geometry Simple geometrical constructions
A/001
Basic Engineering Mathematics, Fourth Edition,
By John Bird
1.3 (b) Geometry Graphical representation, nature and uses of graphs, graphs
Of equations / functions
A/001
Basic Engineering Mathematics, Fourth Edition,
by John Bird
1.3 (c) Geometry Simple trigonometry, trigonometrical relationships, use of
Tables and regular and polar coordinates
A/001
Basic Engineering Mathematics, Fourth Edition,
By John Bird
Cat A Only -Module 02 PHYSICS
2.1 Matter Nature of matter, the chemical elements, structure of atoms, molecules A/002
2.2.1
Mechanics Statics.
Forces, moments and couples, representation as vectors.
Centre of gravity.
Elements of theory of stress, strain and elasticity, tension, compression, shear and
torsion.
Nature and properties of solid, fluid and gas.
Pressure
A/002
2.2.2
Mechanics Kinetics
Linear movement, uniform motion in a straight line, motion under constant acceleration
(motion under gravity)
Rotational movement, uniform circular motion (centrifugal / centripetal forces)
Periodic motion, pendular movement.
Simple theory of vibration, harmonics and resonance.
Velocity ratio, mechanical advantage and efficiency
A/002
2.2.3 (a)
Mechanics Dynamics
Mass
Force, inertia, work, power, energy (potential, kinetic and total energy), heat, efficiency
A/002
2.2.3 (b)
Mechanics Dynamics
Momentum, conservation or momentum
Impulse
Gyroscopic principles
Friction, nature and effects, coefficient of friction (rolling resistance)
A/002
2.2.4 (a)
Mechanics Fluid Dynamics
Specific gravity and density
A/002
2.2.4 (b)
Mechanics Fluid Dynamics
Viscosity, fluid resistance, effects of streamlining
Effects of compressibility on fluids
Static, dynamic and total pressure, Bernoullis Theorem
A/002
2.3 (a)
Thermodynamics
Temperature, Thermometers and temperature scales, Celsius, Fahrenheit and Kelvin,
Heat definition
A/002
2.3 (b) Thermodynamics *** Not Applicable ***
2.4 Optics (Light) *** Not Applicable ***
2.5 Wave Motion and Sound *** Not Applicable ***
Cat B 1 & 2 Module 02 PHYSICS
2.1 Matter Nature of matter, the chemical elements, structure of atoms, molecules A/002
2.2.1
Mechanics Statics.
Forces, moments and couples, representation as vectors.
Centre of gravity.
Elements of theory of stress, strain and elasticity, tension, compression, shear and
torsion.
Nature and properties of solid, fluid and gas.
Pressure
A/002
2.2.2
Mechanics Kinetics
Linear movement, uniform motion in a straight line, motion under constant acceleration
(motion under gravity)
Rotational movement, uniform circular motion (centrifugal / centripetal forces)
Periodic motion, pendular movement.
Simple theory of vibration, harmonics and resonance.
Velocity ratio, mechanical advantage and efficiency
A/002
2.2.3 (a)
Mechanics Dynamics
Mass
Force, inertia, work, power, energy (potential, kinetic and total energy), heat, efficiency
A/002
2.2.3 (b)
Mechanics Dynamics
Momentum, conservation or momentum
Impulse
Gyroscopic principles
Friction, nature and effects, coefficient of friction (rolling resistance)
A/002
2.2.4 (a)
Mechanics Fluid Dynamics
Specific gravity and density
A/002
2.2.4 (b)
Mechanics Fluid Dynamics
Viscosity, fluid resistance, effects of streamlining
Effects of compressibility on fluids
Static, dynamic and total pressure, Bernoullis Theorem
A/002
2.3 (a)
Thermodynamics
Temperature, Thermometers and temperature scales, Celsius, Fahrenheit and Kelvin,
Heat definition
A/002
2.3 (b)
Thermodynamics
Heat capacity, specific heat
Heat transfer, convection, radiation and conduction
Volumetric expansion
First and second law of thermodynamics
Gases, Ideal gases laws, specific heat at constant volume and constant pressure, work
done by expanding gas
Isothermal, Adiabatic expansion and compression, engine cycles, constant volume and
constant pressure, refrigerators and heat pumps
A/002
2.4
Optics (Light)
Nature of light, speed of light
Laws of reflection and refraction, reflection at plane surfaces, reflection by spherical
mirrors, refraction, lenses
Fibre optics
A/002
2.5
Wave Motion and Sound
Wave motion, mechanical waves, sinusoidal wave motion, interference phenomena,
standing waves
Sound, Speed of sound, production of sound, intensity, pitch and quality, Doppler effect
A/002
Cat A Only Module 03 ELECTRICAL FUNDAMENTALS
03.1 Electron Theory C/009 Book 1, Section 1, Chapter 1
03.2 Static Electricity and Conduction C/009 Book 1, Section 2, Chapter 1
03.3 Electrical Terminology C/009 Book 1, Section 3, Chapter 1
03.4 Generation of Electricity C/009 Book 1, Section 4
03.5 DC Sources of Electricity C/009 Book 1, Section 5
03.6 DC Circuits *** Not Applicable ***
03.7 (a) Resistance / Resistor *** Not Applicable ***
03.7 (b) Resistance / Resistor *** Not Applicable ***
03.8 Power *** Not Applicable ***
03.9 Capacitance / Capacitor *** Not Applicable ***
03.10 (a) Magnetism Theory *** Not Applicable ***
03.10 (b) Magnetism Force *** Not Applicable ***
03.11 Inductance / Inductor *** Not Applicable ***
03.12 DC Motor / Generator Theory *** Not Applicable ***
03.13 AC Theory C/009 B00k 2, Section 14
03.14 Resistive (R), Capacitive (C) and Inductive (L)
Circuits *** Not Applicable ***
03.15 Transformers *** Not Applicable ***
03.16 Transformers *** Not Applicable ***
03.17 AC Generators *** Not Applicable ***
03.18 AC Motors *** Not Applicable ***
Cat B 1 & 2 Module 03 ELECTRICAL FUNDAMENTALS
03.1 Electron Theory C/009 Book 1, Section 1, Chapter 1
03.2 Static Electricity and Conduction C/009 Book 1, Section 2, Chapter 1
03.3 Electrical Terminology C/009 Book 1, Section 3, Chapter 1
03.4 Generation of Electricity C/009 Book 1, Section 4
03.5 DC Sources of Electricity C/009 Book 1, Section 5
03.6 DC Circuits C/009 Book 1, Section 6
03.7 (a)
Resistance / Resistor
Resistance and affecting factors
Specific resistance
Resistor colour code, values and tolerances,
preferred values, wattage ratings
Resistors in series and parallel
Calculation of total resistance using series, parallel
and series parallel combinations
Operation and use of potentiometers and rheostats
Operation of Wheatstone Bridge
C/009 Book 1, Section 7
03.7 (b)
Resistance / Resistor
Positive and negative temperature coefficient
conductance
Fixed resistors, stability, tolerance and limitations,
methods of construction
Variable resistors, thermistors, voltage dependent
resistors
Construction of potentiometers and rheostats
Construction of Wheatstone Bridge
C/009 Book 1, Section 8
03.8 Power C/009 Book 1, Section 9
03.9 Capacitance / Capacitor C/009 Book 1, Section 10
03.10 (a)
Magnetism Theory
Theory of magnetism
Properties of a magnet
Action of a magnet suspended in the Earths
magnetic field
Magnetism and de-magnetism
Magnetic shielding
Various types of magnetic material
Electromagnets construction and principles of
operation
Hand clasp rules to determine magnetic field around
current carrying conductor
C/009 Book 2, Section 11 & 12 incl
03.10 (b)
Magnetism Force
Magnetomotive force, field strength, magnetic flux
density, permeability, hysteresis loop, retentivity,
coercive force reluctance, saturation point, eddy
currents.
Precautions for care and storage of magnets
C/009 Book 2, Section 11 & 12 incl
C/009 Book 2, Section 13 Chap 1
03.11 Inductance / Inductor C/009 Book 2, Section 13, Chap 2 to 9
03.12 DC Motor / Generator Theory C/009 Book 3, Chapter 21 (Motor), Chapter 20 (Generator)
03.13 AC Theory C/009 B00k 2, Section 14
03.14 Resistive (R), Capacitive (C) and Inductive (L)
Circuits C/009 B00k 2, Section 15 (Reactive Circuits)
03.15 Transformers C/009 B00k 2, Section 17
03.16 Transformers C/009 B00k 2, Section 17
03.17 AC Generators C/009 B00k 3, Chapter 18
03.18 AC Motors C/009 B00k 3, Chapter 19
Cat B1 Only Module 04 ELECTRONIC FUNDAMENTALS
4.1.1 (a)
Diodes
Diode symbols
Diode characteristics and properties
Diodes in series and parallel
Main characteristics and use of silicon controlled rectifiers (thyristors),
light emitting diode, photo conductive diode, varistor, rectifier diodes
Functional testing of diodes
C/012 Section 1 Chapter 1 to 7
4.1.1 (b) Diodes *** B2 Only ***
4.1.2 (a)
Transistors
Transistor symbols
Component description and orientation
Transistors characteristics and properties
C/012 Section 2 Chapter 1 to 4
4.1.2 (b) Transistors *** B2 Only ***
4.1.3 (a)
Integrated Circuits
Description and operation of logic circuits and linear circuits /
operational amplifiers
C/012 Section 3 Chapter 1 to 5
4.1.3 (b) Integrated Circuits *** B2 Only ***
4.2 Printed Circuit Boards C/012 Section 4 Chapter 1 to 5
4.3 (a)
Servomechanisms
Understanding of the following terms, Open and Closed loop systems,
feedback, follow up, analogue transducers
Principles of operation and use of the following synchrosystem
components / features, resolvers, differential, control and torque,
transformers, inductance and capacitance transmitters
C/012 Section 5 Chapter 1 to 9
4.3 (b) Servomechanisms *** B2 Only ***
Cat B 2 Only Module 04 ELECTRONIC FUNDAMENTALS
4.1.1 (a)
Diodes
Diode symbols
Diode characteristics and properties
Diodes in series and parallel
Main characteristics and use of silicon controlled rectifiers (thyristors),
light emitting diode, photo conductive diode, varistor, rectifier diodes
Functional testing of diodes
C/012 Section 1 Chapter 1 to 7
4.1.1 (b)
Diodes
Materials, electron configuration, electrical properties
P and N type materials, effects of impurities on conduction, majority
and minority characters
PN junction in a semiconductor, development of a potential across a
PN junction in unbiased, forward biased and reverse biased conditions
Diode parameters, peak inverse voltage, maximum forward current,
temperature, frequency, leakage current, power dissipation
Operation and function of diodes in the following circuits:
Clippers, Clampers, full and half wave rectifiers, bridge rectifiers,
voltage doublers and triplers
Detailed operation and characteristics of the following devices:
Silicon controlled rectifier (thyristor), light emitting diode, Shottky
diode, photo conductive diode, varactor diode, varistor, rectifier
diodes, Zener diode
C/012 Section 1 Chapter 1 - 3
B2/001 Chapter 1 Section 1 - 7
B2/001 Chapter 4 Section 1 - 3
4.1.2 (a)
Transistors
Transistor symbols
Component description and orientation
Transistors characteristics and properties
C/012 Section 2 Chapter 1 to 4
4.1.2 (b)
Transistors
Construction and operation of PNP and NPN transistors
Base, collector and emitter configurations
Testing of transistors
Basic appreciation of other transistor types and their uses
Application of transistors, classes of amplifier (A,B,C)
Simple circuits including, bias, decoupling, feedback and stabilisation
Multistage circuit principles, cascades, push-pull, oscillators,
multivibrators, flip-flop circuits
C/012 Section 2 Chapter 1 to 4
B2/001 Chapter 2 Section 1 5
B2/001 Chapter 3 Section 1 3
B2/001 Chapter 5 Section 1 3
B2/001 Chapter 6 Section 1 3
4.1.3 (a)
Integrated Circuits
Description and operation of logic circuits and linear circuits /
operational amplifiers
*** Not Applicable ***
4.1.3 (b)
Integrated Circuits
Description and operation of logic circuits and linear circuits
Introduction to operation and function of an operational amplifier used
as, integrator, differentiator, voltage follower, comparator
Operation and amplifier stages connecting methods, resistive
capacitive, inductive (transformer), inductive resistive (IR), direct
C/012 Section 3 Chapter 1 to 5
B2/001 Chapter 7 Section 1 2
Advantages and disadvantages of positive and negative feedback
4.2 Printed Circuit Boards
C/012 Section 4 Chapter 1 to 5
B2/001 Chapter 8 Section 2
4.3 (a)
Servomechanisms
Understanding of the following terms, Open and Closed loop systems,
feedback, follow up, analogue transducers
Principles of operation and use of the following synchrosystem
components / features, resolvers, differential, control and torque,
transformers, inductance and capacitance transmitters
*** Not Applicable ***
4.3 (b)
Servomechanisms
Understanding of the following terms, Open and Closed loop, follow
up, servomechanism, analogue, transducer, null, damping, feedback,
deadband
Construction operation and use of the following synchrosystem
components, resolvers, differential, control and torque, E and I
transformers, inductance transmitters, capacitance transmitters,
synchronous transmitters
Servomechanism defects, reversal of synchro leads, hunting
C/012 Section 5 Chapter 1 to 9
B2/001 Chapter 9 Section 1 3
Cat A Only Module 05 DIGITAL TECHNIQUES ELECTRONIC
INSTRUMENT SYSTEMS
05.1 Electronic Instrument Systems C/028 Sect 11 & 12, Chap 1 6
05.2 Numbering Systems *** Not Applicable ***
05.3 Data Conversion *** Not Applicable ***
05.4 Data Buses *** Not Applicable ***
05.5 (a) Logic Circuits Identification *** Not Applicable ***
05.5 (b) Logic Circuits Interpretation *** Not Applicable ***
05.6 (a) Basic Computer Structure Computer Terminology
Computer terminology (including bit, byte, software, hardware,
CPU, IC, and various memory devices such as RAM, ROM and
PROM
C/028 Sect 5 Chap 1 (Computer Architecture)
05.6 (b) Basic Computer Structure Computer Related Terminology *** Not Applicable ***
05.7 Microprocessors *** Not Applicable ***
05.8 Integrated Circuits *** Not Applicable ***
05.9 Multiplexing *** Not Applicable ***
05.10 Fibre Optics *** Not Applicable ***
05.11 Electronic Displays *** Not Applicable ***
05.12 Electrostatic Sensitive Devices C/028 Sect 8
05.13 Software Management Control *** Not Applicable ***
05.14 Electromagnetic Environment *** Not Applicable ***
05.15 Typical Electronic / Digital Aircraft Systems *** Not Applicable ***
Cat B 1 Only Module 05 DIGITAL TECHNIQUES ELECTRONIC
INSTRUMENT SYSTEMS
05.1 Electronic Instrument Systems C/028 Sect 11 & 12, Chap 1 6
05.2 Numbering Systems C/028 Sect 1, Chap 1 3
05.3 Data Conversion C/028 Sect 3, Chap 1 7
05.4 Data Buses C/028 Sect 4
05.5 (a) Logic Circuits Identification
Identification of common logic gate symbols, tables and
equivalent circuits
Application of logic diagrams
C/028 Sect 2, Chap 1
05.5 (b) Logic Circuits Interpretation ** B2 Only **
05.6 (a) Basic Computer Structure Computer Terminology
Computer terminology (including bit, byte, software, hardware,
CPU, IC, and various memory devices such as RAM, ROM and
PROM
C/028 Sect 5 Chap 1 (Computer Architecture)
05.6 (b) Basic Computer Structure Computer Related Terminology ** B2 Only **
05.7 Microprocessors ** B2 Only **
05.8 Integrated Circuits ** B2 Only **
05.9 Multiplexing ** B2 Only **
05.10 Fibre Optics C/028 Sect 7 (Data Bus = Data Transmission)
05.11 Electronic Displays C/028 Sect 6, Chap 1 5
05.12 Electrostatic Sensitive Devices C/028 Sect 8
05.13 Software Management Control C/028 Sect 10
05.14 Electromagnetic Environment C/028 Sect 9
05.15 Typical Electronic / Digital Aircraft Systems C/028 Sect 11 & 12, Chap 1 6
Cat B 2 Only Module 05 DIGITAL TECHNIQUES ELECTRONIC
INSTRUMENT SYSTEMS
05.1
Electronic Instrument Systems
C/028 Sect 11 & 12, Chap 1 6
B2/005
05.2
Numbering Systems
C/028 Sect 1, Chap 1 3
B2/005
05.3
Data Conversion
C/028 Sect 3, Chap 1 7
B2/005
05.4 Data Buses C/028 Sect 4
05.5 (a) Logic Circuits Identification
Identification of common logic gate symbols, tables and
equivalent circuits
Application of logic diagrams
C/028 Sect 2, Chap 1
05.5 (b) Logic Circuits Interpretation
Interpretation of logic diagrams
B2/005 Sect 1, Chap 1
05.6 (a) Basic Computer Structure Computer Terminology *** Not Applicable ****
05.6 (b) Basic Computer Structure Computer Related Terminology
Computer related terminology
Operation, layout and interface of the major components in a
micro computer including their associated bus systems
Information contained in single and multi-address instruction
words
B2/005 Sect 3, Chap 1 4
Memory associated terms
Operation of typical memory devices
Operation, advantages and disadvantages of the various data
storage systems
05.7 Microprocessors B2/005 Sect 3, Chap 1 4
05.8 Integrated Circuits B2/005 Sect 1, Chap 1 4
05.9 Multiplexing B2/005 Sect 2, Chap 1
05.10
Fibre Optics
C/028 Sect 7 (Data Bus = Data Transmission)
B2/005 Sect 5
05.11 Electronic Displays C/028 Sect 6, Chap 1 5
05.12 Electrostatic Sensitive Devices C/028 Sect 8
05.13 Software Management Control C/028 Sect 10
05.14 Electromagnetic Environment C/028 Sect 9
05.15 Typical Electronic / Digital Aircraft Systems C/028 Sect 11 & 12, Chap 1 6
Cat A & B 1&2 Module 06 MATERIALS AND HARDWARE
6.1 a Aircraft Materials Ferrous - Characteristics C003 Book 1 Chap 1 & 3
6.1 b Aircraft Materials Ferrous - Testing C003 Book 1 Chap 4
Not Applicable Cat A
6.2 a Aircraft Materials Non ferrous - Characteristics C003 Book 1 Chap 2 & 3
6.2 b Aircraft Materials Non ferrous Testing C003 Book 1 Chap 4
6.3.1 a Aircraft Materials - Composite & Non Metal - Characteristics C003 Book 1 Chap 5
6.3.1 b Aircraft Materials - Composite & Non Metal - Defects/ Repair C003 Book 1 Chap 5
Not Applicable Cat B2
6.3.2 Aircraft Materials - Composite & Non Metal - Wooden
Structures
C003 Book 1 Chap 7
C019 Chap 10
Not Applicable Cat B2
6.3.3 Aircraft Materials - Composite & Non Metal - Fabric Covering C003 Book 1 Chap 8 & 9
C019 Chap 11
Not Applicable Cat B2
6.4 (a) Corrosion and its Prevention
Chemical fundamentals
Formation by galvanic action process, microbiological stress
C003 Book 1 Chap 6
6.4 (b) Corrosion and its Prevention
Types of corrosion and their identification
Causes of corrosion
C003 Book 1 Chap 6
Material types, susceptibility to corrosion
6.5.1 Fasteners Screw Threads C003 Book 3 Chap 1
6.5.2 Fasteners Bolts, Studs & Screws C003 Book 3 Chap 2
6.5.3 Fasteners Locking Devices C003 Book 3 Chap 3
6.5.4 Fasteners Aircraft Rivets C003 Book 3 Chap 4
6.6 (a) Pipes and Unions
Identification of, and types of rigid and flexible pipes and their
connectors used in aircraft
C003 Book 2 Part 1 Chap 3
6.6 (b) Pipes and Unions
Standard unions for aircraft hydraulic, fuel, oil, pneumatic and air
systems
C003 Book 2 Part 1 Chap 3
6.7 Springs C003 Book 2 Part 1 Chap 5
Not Applicable Cat A
6.8 Bearings C003 Book 2 Part 1 Chap 4
6.9 Transmissions
-Gears
-Belts
-Chains
C003 Book 2 Part 1 Chap 6
C003 Book 2 Part 1 Chap 7
C003 Book 2 Part 1 Chap 8
6.10 Control Cables C003 Book 2 Part 1 Chap 1 & 2
6.11 Electrical Cables & Connectors C020 Chap 1, 2 & 3
Cat A & B 1&2 - Module 07 MAINTENANCE PRACTICES
7.1 Safety Precautions Aircraft and Workshop C/001 Part 1 Chap 1 Sect 1-4
7.2 Workshop Practices C/001 Part 1 Chap 2 & 3
7.3 Tools C/001 Part 1 Chap 2 & 3
C/020 Chap 2 Sect 1,2,4 & 5
7.4 Avionic General Test Equipment C/020 Chap 4, 5 & 6
Not Applicable Cat A
7.5 Engineering Drawings, Diagrams and Standards C/001 Part 2 Chap 1,2 & 3
7.6 Fits and Clearances C/003 Book 2 Part 2 Chap 8, 9 & 10
7.7 Electrical Cables and Connectors C/020 Chap 1 Sect 1 & 2
7.8 Riveting C/001 Part 1 Chap 4
C/003 Book 3 Chap 4
B1/001 Chap 2
Not Applicable Cat B2
7.9 Pipes and Hoses C/003 Book 2 Part 2 Chap 4, 5 & 6
Not Applicable Cat B2
7.10 Springs C/003 Book 2 Part 2 Chap 3 Sect 1
Not Applicable Cat B2
7.11 Bearings C/003 Book 2 Part 2 Chap 7
Not Applicable Cat B2
7.12 Transmissions C/003 Book 2 Part 2 Chap 1 Sect 3 & 4
C/003 Book 2 Part 2 Chap 3 Sect 2-8
Not Applicable Cat B2
7.13 Control Cables C/003 Book 2 Part 2 Chap 1 & 2
Not Applicable Cat B2
7.14.1 Material Handling Sheet Metal B1/001 Chap 8
Not Applicable Cat B2
7.14.2 Material Handling Composite and Non-metallic C/003 B1/001 Chap 5
Not Applicable Cat B2
7.15 a Welding, Brazing, Soldering and Bonding Soldering C/020 Chap 2 Sect 5
7.15 b Welding, Brazing, Soldering and Bonding Welding and Brazing B1/001 Chap 9
Not Applicable Cat B2
7.16 a Aircraft Weight and Balance Centre of Gravity/Balance Limits
Calculation
C/023 Chap 14 Sect 1, 2, 3, 4, 5, 10, 15, 16, 19,
20, & 22
7.16 b Aircraft Weight and Balance Aircraft Weighing Preparation C/023 Chap 14
Not Applicable Cat B2
7.17 Aircraft Handling and Storage C/023 Chap 1 to 13 inclusive
7.18 a Disassembly, Inspection, Repair and Assembly Techniques
Defects, Corrosion and Visual
C/022 Book 1 Chap 3
7.18 b Disassembly, Inspection, Repair and Assembly Techniques
Repair, Ageing and Fatigue Control
C/022 Book 1 Chap 2, 4, 5, 6 & 7
Not Applicable Cat B2
Not Applicable Cat A
7.18 c Disassembly, Inspection, Repair and Assembly Techniques
Non Destruction Testing
C/022 Book 1 Chap 1
Not Applicable Cat A
7.18 d Disassembly, Inspection, Repair and Assembly Techniques
Disassemble & Re-assembly
C/022 Book 1 Chap 8 & 9
7.18 e Disassembly, Inspection, Repair and Assembly Techniques
Trouble Shooting
C/022 Book 1 Chap 9
Not Applicable Cat A
7.19 a Abnormal Events
Lightning Strikes and HIRF
C/022 Book 2 Chap 1, 4 & 6
B1.1/022 Chap 4 & 6
7.19 b Abnormal Events
Heavy Landing & Turbulent Flight
C/022 Book 2 Chap 1, 3, 5 & 7
B1.1/022 Chap 1,2,3,5 & 7
Not Applicable Cat B2
7.20 Maintenance Procedures C/027 Chap 1 & 2
Cat A & B 1&2 -Module 08 BASIC AERODYNAMICS
08.1 Physics of the Atmosphere C/008 Section 1
08.2 Aerodynamics C/008 Section 2
08.3 Theory of Flight C/008 Section 3
08.4 Flight Stability and Dynamics C/008 Section 4
Cat A & B 1&2 -Module 09 HUMAN FACTORS Book C/025
09.1 General C/025 - 9.1.1 to 9.1.3 Pages 1 9
09.2 Human Performance and Limitations C/025 - 9.2.1 to 9.2.6 Pages 11 61
09.3 Social Psychology C/025 - 9.3.1 to 9.3.6 Pages 65 85
09.4 Factors Affecting Performance C/025 - 9.4.1 to 9.4.6 Pages 87 113
09.5 Physical Environments C/025 - 9.5.1 to 9.5.4 Pages 121 131
09.6 Tasks C/025 - 9.6.1 to 9.6.4 Pages 133 143
09.7 Communication C/025 - 9.7.1 to 9.7.4 Pages 145 161
09.8 Human Error C/025 - 9.8.1 to 9.8.4 Pages 165 193
09.9 Hazards in the Workplace C/025 - 9.9.1 to 9.9.2 Pages 203 - 213
Cat A & B 1 Only - Module 11 A TURBINE AEROPLANE AERODYNAMICS,
STRUCTURES AND SYSTEMS
11.1 Theory of Flight C/018 Chapter 1
11.1.1 Aeroplane Aerodynamics and Flight Controls C/018 Chapter 2 & 3
11.2 (a) Airframe Structures - General Concepts
Airworthiness
Structional classification
Failsafe, safe life, damage tolerance concepts
Zonal and station identification systems
Stress, strain, bending, compression, shear, torsion, tension,
hoop stress, fatigue
Drains and ventilation provisions
System installation provisions
Lightning strike protection provision
Aircraft bonding
C/019
11.2 (b) Airframe Structures - General Concepts
Construction methods
Structure assembly techniques
Methods of surface protection
Surface cleaning
Airframe symmetry
B1.1/019 Chapter 1 & 2
11.3.1 Airframe Structures Aeroplanes
Fuselage
B1.1/019 Chapter 3 & 4
11.3.2 Airframe Structures Aeroplanes B1.1/019 Chapter 4
Wings
11.3.3 Airframe Structures Aeroplanes
Stabilisers
B1.1/019 Chapter 5
11.3.4 Airframe Structures Aeroplanes
Flight Control Surfaces
B1.1/019 Chapter 6
11.3.5 Airframe Structures Aeroplanes
Nacelles / Pylons
B1.1/019 Chapter 7
11.4.1 Air Conditioning and Cabin Pressurisation (ATA 21)
Air Supply
B1/005 Part 1 Chapter 1 Section 1 Page 1 & 2
11.4.2 Air Conditioning and Cabin Pressurisation (ATA 21)
Air Conditioning
B1/005 Part 1 Chapter 1
11.4.3 Air Conditioning and Cabin Pressurisation (ATA 21)
Pressurisation
B1/005 Part 1 Chapter 2
11.4.4 Air Conditioning and Cabin Pressurisation (ATA 21)
Safety and Warning Devices
B1/005 Part 1
11.5.1 Instruments / Avionic Systems
Instrument Systems (ATA 31)
C/037
11.5.2 Instruments / Avionic Systems
Avionic Systems
C/035 Avionics
11.6 Electrical Power (ATA 24) C/032 Book 1
11.7 (a) Equipment and Furnishings (ATA 25)
Emergency Equipment
B1/005 Part 3 Chapter 1 & 2
11.7 (b) Equipment and Furnishings (ATA 25)
Cabin Lay-out
B1/005 Part 3 Chapter 1, 2, 3, 6, 7 & 8
11.8 (a) Fire Protection (ATA 26)
Fire and Smoke Detection
B1/005 Part 2 Chapter 11 & 12
11.8 (b) Fire Protection (ATA 26)
Portable Fire Extinguisher
B1/005 Part 2 Chap 12 Part 3 Chap 5 Section 4
11.9 Flight Controls (ATA 27) B1.1/011 Part 1 Flight Control
11.10 Fuel Systems (ATA 28) B1/005 Part 4
11.11 Hydraulic Power (ATA 29) B1/005 Part 5 Chapter 1 to 10
11.12 Ice and Rain Protection (ATA 30) B1/005 Part 2 Chapter 1 to 10
11.13 Landing Gear (ATA 32) B1.1/011 Part 2 Landing Gear
11.14 Lights (ATA 33) C/032 Book 2
11.15 Oxygen (ATA 35) B1/005 Part 1 Chapter 3
11.16 Pneumatic / Vacuum (ATA 36) B1/005 Part 5 Chapter 11 & 12
11.17 Water / Waste (ATA 38) B1/005 Part 3 Chapter 4, 5 & 8
11.18 On Board Maintenance Systems (ATA 45) C/035 On-Board-Maintenance
Cat B2 Only Module 14 PROPULSION
14.1(a) Turbine Engines
Constructional arrangement and operation of
turbojet, turbofan, turbo-shaft and turbo-
propeller engines
B2/020 Section 1 Chapter 1 Basic Jet Mechanics
B2/020 Section1 Chapter 2 Jet Engine Working Cycle and Airflow
B2/020 Section1 Chapter 3 Compressors
B2/020 Section1 Chapter 4 Combustion Chambers
B2/020 Section1 Chapter 5 Turbines
B2/020 Section1 Chapter 6 Exhaust System
14.1(b) Turbine Engines
Electronic Engine control and fuel metering
systems (FADEC)
B2/020 Section2 Chapter 1 Full Authority Digital Engine Control (FADEC)
14.2 Engine Indicating Systems B2/020 Section3 Chapter 1 Engine Speed (RPM)
B2/020 Section3 Chapter 2 Exhaust Gas Temperature (EGT)
B2/020 Section3 Chapter 3 Pressure Indication Systems
B2/020 Section3 Chapter 4 Temperature Indicating Systems
B2/020 Section3 Chapter 5 Engine Pressure Ratio (EPR)
B2/020 Section3 Chapter 6 Fuel Flow Indication
B2/020 Section3 Chapter 7 Engine Manifold Pressure Indication
B2/020 Section3 Chapter 8 Torque Monitoring Systems
Cat A - Only Module 15 GAS TURBINE ENGINE
15.1 Fundamentals C016 Part 1 Chap 1
15.2 Engine Performance * NOT REQUIRED *
15.3 Inlet C016 Part 1 Chap 2 Sect 2
15.4 Compressors C016 Part 1 Chap 2 Sect 1
15.5 Combustion Section C016 Part 1 Chap 2 Sect 3
15.6 Turbine Section C016 Part 1 Chap 2 Sect 4
15.7 Exhaust C016 Part 1 Chap 2 Sect 5, 6 & 7
15.8 Bearings & Seals * NOT REQUIRED *
15.9 Lubricants and Fuels C016 Part 1 Chap 3 Sect 1 & 2
15.10 Lubrication Systems C016 Part 1 Chap 3 Sect 1
15.11 Fuel Systems C016 Part 1 Chap 3 Sect 2
C016 Part 1 Chap 4 Sect 12
15.12 Air Systems C016 Part 1 Chap 3 Sect 3
15.13 Starting & Ignition Systems C016 Part 1 Chap 3 Sect 5 & 6
15.14 Engine Indication Systems C016 Part 1 Chap 4
15.15 Power Augmentation * NOT REQUIRED *
15.16 Turbo-prop Engines C016 Part 1 Chap 1 Sect 4
C016 Part 1 Chap 3 Sect 7 & 8
15.17 Turbo-shaft Engines C016 Part 1 Chap 1 Sect 4
C016 Part 1 Chap 3 Sect 9
15.18 Auxiliary Power Units (APU) C016 Part 1 Chap 3 Sect 10
15.19 Power Plant Installation C016 Part 1 Chap 3 Sect 11
15.20 Fire Protection Systems C016 Part 1 Chap 3 Sect 12
15.21 Engine Monitoring and Ground Operation C016 Part 1 Chap 3 Sect 13, 14, 15, 16 & 17
15.22 Engine Storage and Preservation
* NOT REQUIRED *
Cat B 1.1 - Only
Module 15 GAS TURBINE ENGINE
15.1 Fundamentals B1/018 Part 1 Chap 1 Sect 1, 2 & 3 Introduction, Gas Physics and Jet Mechanics
15.2 Engine Performance B1/018 Part 2 Chap 1 Efficiencies, EPR, SFC, Thrust
B1/018 Part 3 Chap 1 Thrust Indication, EPR, Flat Rating, Limitations
15.3 Inlet B1/018 Part 1 Chap 1 Sect 5 Types of Intakes
B1/018 Part 2 Chap 2 Sect 1 & 2 Inlet Ducts and Intake Ice Protection
B1/018 Part 2 Chap 6 Engine Ice Protection Systems
15.4 Compressors B1/018 Part 1 Chap 4 & 9 Compressors and Materials
B1/018 Part 5 Chap 1 Fan Construction
15.5 Combustion Section B1/018 Part 1 Chap 1 Sect 6 & 9 Combustion Section and Materials
15.6 Turbine Section B1/018 Part 1 Chap 1 Sect 7 & 9 Turbine Section, Assemblies and Materials
15.7 Exhaust B1/018 Part 1 Chap 1 Sect 8 & 9 Exhaust Systems and Materials
B1/018 Part 2 Chap 2 Sect 3 & 4 Noise Reduction and Thrust Reversal
B1/018 Part 4 Chap 1 Sect 1 Thrust Reversers
15.8 Bearings & Seals B1/018 Part 1 Chap 1 Sect 10 Bearings
B1/018 Part 2 Chap 4 Sect 6 Air Sealing
15.9 Lubricants and Fuels B1/018 Part 2 Chap 3 Sect 1, 2 & 3 Gas Turbine Fuels, Oils and Additives
B1/018 Part 2 Chap 4 Sect 1 Engine Oil Systems
15.10 Lubrication Systems B1/018 Part 1 Chap 1 Sect 12 page19 to 22 Engine Oil Systems
B1/018 Part 2 Chap 4 Engine Oil Systems
15.11 Fuel Systems B1/018 Part 1 Chap 1 Sect 11 & Sect 12 page 1-13
B1/018 Part 2 Chap 3 Gas Turbine Engine Fuel Systems
B1/018 Part 3 Chap 2 - FADEC
15.12 Air Systems B1/018 Part 2 Chap 5 Engine Air Systems
B1/018 Part 3 Chap 3 Sect 11 Engine Airflow Control System
15.13 Starting & Ignition Systems B1/018 Part 3 Chap 3 Sect 1 & 2 Starting and Ignition Systems
15.14 Engine Indication Systems B1/018 Part 3 Chap 3 Sect 3 11 Oil & Fuel Pressure, Oil & Fuel Temperature, Fuel Flow,
Speed, Vibration, Torque, Pyrometers, Air Flow Control
15.15 Power Augmentation B1/018 Part 3 Chap 4 Power Augmentation, Water Injection & Afterburner
15.16 Turbo-prop Engines B1/018 Part 1 Chap 1 Sect 3 page 11 & 12 - Basic Construction & Operation of Turbo-prop
Engines
B1/018 Part 1 Chat 1 Sect 12 page 14 to 18 Reduction Gears
B1/018 Part 3 Chap 5 Turbo-prop Engine Controls
15.17 Turbo-shaft Engines B1/018 Part 3 Chap 6 Turbo-shaft Engines
B1/018 Part 1 Chat 1 Sect 12 page 14 to 18 Reduction Gears
15.18 Auxiliary Power Units (APU) B1/018 Part 4 Chap 1 Sect 2 Auxiliary Power Units
15.19 Power Plant Installation B1/018 Part 4 Chap 1 Sect 4 Power Plant Installation
15.20 Fire Protection Systems B1/018 Part 4 Chap 1 Sect 5 Fire Protection and Protection
15.21 Engine Monitoring and
Ground Operation
B1/018 Part 5 Chap 5 Maintenance, Fan Balancing, Ground Running, Troubleshooting, Health
Monitoring, Inspection, Engine Control, Gas Path Cleaning, Performance Checking
15.22 Engine Storage and
Preservation
B1/018 Part 4 Chap 1 Sect 6 Storage of Gas Turbine Engines
Cat B 1 Module 17 PROPELLERS
17.1 Fundamentals B1.1/021 Chapter 1 Propeller Theory
17.2 Propeller Construction B1.1/021 Chapter 2 Constant Speed Propeller
B1.1/021 Chapter 4 Section 1 Torquemeter
17.3 Propeller Pitch Control B1.1/021 Chapter 2 Constant Speed Propeller
17.4 Propeller Synchronising B1.1/021 Chapter 4 Section 4 Synchronisation and Synchrophasing
17.5 Propeller Ice Protection B1.1/021 Chapter 4 Section 2 & 3 Fluid and Electrical De-icing
17.6 Propeller Maintenance B1.1/021 Chapter 3 Propeller Maintenance
B1.1/021 Chapter 4 Section 5 Ground Running
17.7 Propeller Storage and Preservation B1.1/021 Chapter 4 Section 6 Propeller Preservation
Cat A Module 17 PROPELLERS
17.1 Fundamentals CAT A/17
17.2 Propeller Construction CAT A/17
17.3 Propeller Pitch Control CAT A/17
17.4 Propeller Synchronising *** NOT REQUIRED ***
17.5 Propeller Ice Protection CAT A/17
17.6 Propeller Maintenance CAT A/17
17.7 Propeller Storage and
Preservation
CAT A/17